Cinnamon Bay
Intel Atom Z5xx series, extended temperature, low-power, optional 25.5W 802.3at Power over Ethernet
Overview
At a mere 88 x 110mm, ADI Engineering’s innovative new Cinnamon Bay SBC product line is the industry’s smallest and lowest cost family of full-function embedded Single Board Computers (SBCs) for the new Intel® Atom Z510P, Z530P and extended temperature Z520PT processors. ADI’s Cinnamon Bay SBC family consists of three models targeting a wide range of deeply embedded applications such as IP media, interactive kiosks, panel PCs, digital signage, thin clients, military, medical, wireless access, industrial controls, general-purpose embedded computing, gaming, and point of sale (PoS) terminals. The new Intel Atom Z5xxP processor line allows Cinnamon Bay SBC to offer innovative new features such as -40 to +85C extended temperature operation, Power over Ethernet, and lower price points than competitive products.
Cinnamon Bay SBC can be used standalone in many applications, since common interfaces and standard connectors are included on the single board. When expansion is required, one of ADI’s off-the-shelf daughtercards, or a custom application-specific one, can be added to meet unique requirements for HD or SD video, audio, networking, and other features—transforming Cinnamon Bay into a differentiated end product with low cost and quick time to market.
Where to Buy
Specs
| Feature | Cinnamon Bay SBC A530P | Cinnamon Bay SBC A510P | Cinnamon Bay SBC A520PT (Extended Temperature) |
|---|---|---|---|
| CPU | Intel® Atom Z530P, 1.6 GHz | Intel® Atom Z510P, 1.1 GHz | Intel® Atom Z520PT, 1.33 GHz, extended temperature |
| System Controller Hub (SCH) | Intel US15WP | Intel US15WP | Intel US15WPT, extended temperature |
| DDR2 | SO-DIMM socket, supporting 256MB - 2GB | Same | Same |
| Ethernet | One RJ45 Gb Ethernet port (connector on board) | Same | Same |
| Hardware Offloaded IEEE 1588 Ethernet packet timestamping and 802.1as synchronization | Yes | Same | Same |
| USB 2.0 Host | Four (Two connectors on-board, Two ports via header) | Two (Two connectors on-board) | Four (Two connectors on-board, Two ports via header) |
| MicroSD Slot | One (connector on board) | Same | Same |
| Fully Hardware Offloaded Video Decoder (built into Atom chipset) | MPEG2, MPEG4, H.264, VC1 and WMV9 - up to 1080p | Same | Same |
| Graphics (built into Atom chipset) | Intel GMA 500 - 2D, 3D, and advanced 3D | Same | Same |
| Audio | Intel HD Audio, with stereo line out (via header) | Intel HD Audio, with stereo line out (via header) | |
| Boot Flash | 16Mbit Serial Boot Flash | Same | Same |
| Trusted Platform Module | Yes | Yes | |
| LVDS Video | Yes (connector on board) | Same | Same |
| Touchscreen Controller | Analog Resistive with 4, 5, and 8-wire support | Same | Same |
| LCD Backlight Power (5V, 12V) | Yes (connector on board) | Same | Same |
| 802.3at Draft 3.0 PoE+ | Yes, via ADI's PoE+ Option Module
| Same | Same |
| 12V Power Input Jack | Yes (connector on board) | Same | Same |
| ADI Expansion Daughtercard Interface | Yes (connector on board) | Yes | Yes |
| PATA 2.5" HDD Connector | Yes (connector on board) | Same | Same |
| Discrete I/O | 4-bits (via header) | 4-bits (via header) | |
| RS-232 | Yes (via header) | Yes (via header) | |
| IrDA | Yes (via header) | Yes (via header) | |
| Voltage and Temperature Monitor | Yes | Yes | Yes |
| Battery-Backed Real-Time Clock | Yes | Yes | Yes |
| On-Board Hardware Watchdog Timer | Yes | Yes | Yes |
| XDP-SFF Debug connector | Yes | Yes | Yes |
| Voltage and Temperature Monitors | Yes | Yes | Yes |
| Operating Temperature Range | 0 to 70C | 0 to 70C | -40 to 85C |
| Fanless Operation | Yes | Yes | Yes |
| Power Consumption |
| Same | Same |
| Sleep State Wakeup Triggers |
| Same | Same |
| RoHS Compliant | Yes | Yes | Yes |
| Regulatory Compliance |
Note: Even without an enclosure, Cinnamon Bay SBC is an FCC Part 15 DoC digital device and meets CE emissions requirements - stringent system-level compliance standards not met by other Intel Atom SBCs. | Same | Same |
Documents
Cinnamon Bay Display Kit Datasheet (497 KB)- Extended Support Product Brief (200 KB)
- Cinnamon Bay SBC Datasheet (647 KB)
- Cinnamon Bay SBCCE Test Report (788 KB)
- Cinnamon Bay POE Datasheet (363 KB)
- Cinnamon Bay Standard Kit Datasheet (288 KB)
- CBSBC Thermal AppNote R100 (528 KB)
- Cinnamon Bay SBC FCC Test Report (744 KB)
OpenIPWaterfall (215 KB)
Cinnamon Bay SBC Block Diagram (145 KB)
Cinnamon Bay Custom Display Development Kit
ADI Engineering’s Custom Display Development Kit for Cinnamon Bay SBC provides a quick and convenient way for developers to obtain support for new LCD displays not already supported by Cinnamon Bay SBC. When a new display is just what your application needs, the Custom Display Development Kit allows ADI to seamlessly take care of all the hassles of getting your special display working.
Cinnamon Bay Headless Development Kit
ADI Engineering’s Standard Development Kit provides everything needed to develop your headless (non-video) application for Cinnamon Bay SBC. The Standard Development Kit is a complete development system, including a Cinnamon Bay board, DVI daughtercard, HDD with Linux and a Windows Embedded Standard evaluation license pre-installed, cables, power supplies, documentation and [...]
Cinnamon Bay Video Development Kit
ADI Engineering’s Video Development Kit is a complete development system for customers using one of ADI’s already supported LCD panels. The kit includes a Cinnamon Bay board, 10.4” CCFL backlit LCD, touchscreen, backlight inverter, HDD with Linux and Windows Embedded Standard preinstalled, 802.3at PoE+ and conventional power supplies all mounted on a folding acrylic base. The kit also includes documentation, cables, and other accessories, and it comes fully assembled and tested, so you can immediately start developing with Cinnamon Bay SBC.
Open IP Design Source Kits
ADI's Open IP Design Source Kits provide everything you need to build or modify Cinnamon Bay yourself – hardware CAD source files (schematic, PCB layout), firmware and software (BIOS, OS's, drivers, etc.), bill of materials, test code, documentation, design and manufacturing licenses, and engineering support from ADI. By establishing a path to customer design licensing and self-manufacturing, ADI's Open IP Design Source Kits restore customer control lost in other COTS approaches. Design Source Kits available for Cinnamon Bay include:
- Hardware Design Source Kit
- BIOS Design Source Kit
Please contact us for more information on kit contents, pricing, and license terms.
DVI / VGA Daughtercard
The DVI / VGA Expansion daughtercard adds a DVI or VGA output and other expansion ports to ADI’s Cinnamon Bay and Cinnamon Bay EX boards.
PoE+ Module Design Kit
25.5W 802.3at compliant complete PD extended temperature, electrically isolated, built-in EMI and transient protection.